Instruction manual

OPTIONAL DISINFECTION

2. VINEGAR SOLUTION:

i. Rinse the Nebulizer Unit (Medication Cup,

Nebulizer Body, Base and Mouthpiece or

Mask Adapter) under running hot tap water

after every use.

ii. Shake off excess water, and allow parts to fully

air dry on a clean, dry towel, out of the reach

of children.

iii. Fill a container with a mixture of three (3) parts

hot water to one (1) part white distilled vinegar.

iv. Soak the Nebulizer Unit Parts (Medication Cup

and Cap, Nebulizer Body, and Mouthpiece

or Mask Adapter) in the solution for thirty

(30) minutes.

v. Rinse all pieces thoroughly under running hot

tap water.

vi. Shake off excess water, and allow parts to air

dry on a clean, dry towel, out of the reach of

children.

vii. Make certain that all disinfected parts are

completely dry before you store or use them.

Cleaning of Control Module, Cable, AC/DC Adapter:

Wipe with a clean cloth dampened with warm water and mild

liquid detergent.

• Do not immerse in liquid.

• Do not use abrasive or sharp tools.

• Do not spray liquid directly onto the control

module.

• Do not immerse control module in liquid.