Certifications 2

Seite 1 von 5
Druckdatum: 18.09.2021 überarbeitet am: 14.03.2019
8843 High-Flon PTFE-Öl – medium viscosity
Safety Data Sheet
According to Regulation (EC) No 1907/2006 (REACH)
1.1. Product identifier
8843 High-Flon PTFE-Öl – medium viscosity
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture:
Lubricant
Uses advised against:
Sector of uses [SU]
SU 21: Consumer uses: Private households (= general public = consumers)
1.3. Details of the supplier of the safety data sheet
Supplier (manufacturer/importer/only representative/downstream user/distributor):
ÄRONIX-Produkte
Albert-Einstein-Str. 5, 69190 Walldorf
Telefon [phone]
Telefax 0049 6227-35 98 41
[e-mail]
1.4. Emergency telephone number
Tel.: -----
Notrufnummer der Gesellschaft:
Tel.: 08:00h – 17:00h 0049 6227/35 98 40
2. Hazards idenfication
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [CLP]:
The mixture is classified as not hazardous according to regulation (EC) No 1272/2008 [CLP].
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
According to EC directives or the corresponding national regulations the product does not have to be
labelled.
Hazard statements: -
Supplemental Hazard information (EU): -
Precautionary statements Prevention
P270
Do not eat, drink or smoke when using this product.
2.3. Other hazards
No data available
3. Composition / information on ingredients
3.1. Mixtures
Description:
Mixture of u.s. substances and non-dangerous substances
Hazardous ingredients / Hazardous impurities / Stabilisers:
product identifiers
Substance name
Classification according to Regulation (EC) No 1272/2008 [CLP]
Concentration
CAS-Nr.: 68037-01-4
poly(1-decene)
≤ 100
Gew-%
4. First aid measures
4.1. Description of first aid measures
General information:
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety
data sheet if possible). Remove victim out of the danger area. Remove contaminated, saturated
clothing. If unconscious place in recovery position and seek medical advice. Do not leave affected
person unattended.
Following inhalation:
Provide fresh air.
In case of skin contact:
No special measures are necessary.
After eye contact:
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding
eyelids apart and consult an ophthalmologist.
3. Identification of the substance/mixture and of the company/undertaking