Certifications 2

Seite 3 von 5
Druckdatum: 18.09.2021 überarbeitet am: 14.03.2019
8843 High-Flon PTFE-Öl – medium viscosity
8.1. Control parameters
No data available
8.2. Exposure controls
8.2.1. Appropriate engineering controls
No data available
8.2.2. Personal protection equipment
Eye/face protection:
Eye glasses with side protection
Skin protection:
Tested protective gloves must be worn DIN EN 374 Suitable material: NBR (Nitrile rubber) Breakthrough
time (maximum wearing time) min In the case of wanting to use the gloves again, clean them before
taking off and air them well. Breakthrough times and swelling properties of the material must be taken
into consideration.
Respiratory protection:
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must
be worn.
8.2.3. Environmental exposure controls
No data available
8.3. Additional information
No data available
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Physical state: liquid, medium viscosity Colour: cloudy
Odour: characteristic
Safety relevant basis data
parameter
at °C
method
Remark
pH
not determined
Melting point/freezing point
not determined
Freezing point
not determined
Initial boiling point and boilingrange
> 150°C
Decomposition temperature (°C)
not determined
Flash point
244°C
Pour point
-63°C
Ignition temperature in °C
no data available
Upper/lower flammability or
explosive limits
not determined
Vapour pressure
not determined
Vapour density
not determined
Density
no data available
Bulk density
not determined
Water solubility (g/L)
not determined
Partition coefficient: n-octanol/water
not determined
Dynamic viscosity
not determined
Kinematic viscosity
not determined
40°C
9.2. Other information
No data available
10. Stability and reactivity
10.1. Reactivity
No data available
10.2. Chemical stability
The mixture is chemically stable under recommended conditions of storage, use and temperature.
10.3. Possibility of hazardous reactions
No hazardous reaction when handled and stored according to provisions.
10.4. Conditions to avoid
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
10.5. Incompatible materials
Oxidising agent, strong
10.6. Hazardous decomposition products
No known hazardous decomposition products.