User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
4
2.2. EDL Nano Installation and Startup Procedures
2.2.1. Input Power Supply
The EDL unit requires a voltage be provided between 8 – 18V. Application of power to the data
link turns on the system.
2.2.1.1. NANO GMSK current and power measurements
Below is a measurement of the maximum current draw from a NANO GMSK radio over a period
of time.
Table 2-1. GMSK Typical Peak Current and Power 1800 Mhz
Description
Voltage
(VDC)
Current
(mA)
Power
(W)
Tx power
dBm
BS Tx 50% ,50% Rx, data, Hi Power
12
1496
18.900
35
BS Tx 50% ,50% Rx, data, Low Power
12
1425
17.100
33
BS Tx 70% , 30% Rx, data, Hi Power
12
1794
21.528
35
BS Tx 70% , 30% Rx, data, Low Power
12
1600
19.200
33
BS Tx/Rx Off
12
411
4.932
N/A
Table 2-2. GMSK Typical Peak Current and Power 2300 MHz
Description
Voltage
(VDC)
Current
(mA)
Power
(W)
Tx power
dBm
BS Tx 50% ,50% Rx, data, Hi Power
12
1275
15.300
35
BS Tx 50% ,50% Rx, data, Low Power
12
996
11.952
33
BS Tx 70% , 30% Rx, data, Hi Power
12
1419
17.028
35
BS Tx 70% , 30% Rx, data, Low Power
12
1235
14.820
33
BS Tx/Rx Off
12
408
4.896
N/A
2.2.1.2. NANO OFDM current and power measurements
Measurements were taken at room temperature (25 C).
Table 2-3. OFDM Typical Current and Power 1800 MHz
Description
Voltage
(VDC)
Current
(mA)
Power
(W)
TX power
(dBm)
BS Tx 50% data, no video, Hi data rate
12
920
11.0
31
BS Tx 50% data, no video, Hi power
12
965
11.6
33
BS Tx 70% data, no video, Hi data rate
12
945
11.3
31
BS Tx 70% data, no video, Hi power
12
995
11.9
33