User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
46
Figure 3-37 GMSK BS Profile Config Page
Table 3-11. Base Station Profile Config Page
Field
Description
1
Current ACM
Parameters
OFDM ACM decisions are based on the received CINR
and FEC corrected bits.
GMSK ACM decisions are based on the received SNR and
FEC corrected bits.
 Cur Exit Steps – Current number of steps to lower
the FEC Code type if need be.
 Cur Frame Accum – Current number of frames to
Accumulate before making the decision to move
between FEC Codes.
2
Change ACM
Parameters
 FEC Exit Steps – Provides the capability for the
administrator to configure the number of steps in
the burst profile table to take when ACM
determines it is time to exit the current FEC. Valid
of values are 0-2. A value of 0 means to jump to
most robust FEC configured and enabled.
 FEC Entry Frame Accumulation – Provides the
capability for the administrator to configure the
number of frames that must be accumulated in