User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
52
Table 3-12. Base Station Radio Control
Field/Control
Description
4
User Bandwidth
Allocation
The current link bandwidth allocation is shown in
percentage of upstream and downstream
allocation. This value only gets set on the base
station and gets distributed to the subscribers.
Currently the limits for the allocation are 80% and
20% in either direction
 Up % and Down % - Displays the current
allocation of the network.
 Link Bandwidth Allocation Slide Bar –
Provides a method to adjust the allocation.
The Down and Up percentages on each
side of the slide bar displays the adjusted
value. The user can also type in the
percentages in the Down and Up boxes
instead of sliding the bar.
 Set Allocation Button – Changes the
current allocation to the new settings
displayed in the Down and Up boxes
adjacent to the slide bar. Once selected
the Up % and Down % on the left updates
and the new values distribute through the
network.
5
Channel /
Channelization
Displays channel information for the base station.
 Current Channel – Displays the current
channel and frequency of the base station.
 Channel (Freq) – Drop down list to
choose a different channel/frequency for
the base station. The base station and
subscriber stations need to be configured
for the same channelization for proper
operation.
 Set Button – Changes the current
channel/frequency of the base station to
the channel selected by the channel (freq)
pull down or the custom frequency.
 Custom Freq (1800 – 2500) –– Allows the
administrator to type in a frequency
instead of selecting one from the channel
(freq) drop down list. The frequency must
be a valid operating frequency for the unit.
The base station and subscriber stations
need to be configured for the same
channelization for proper operation.
 Set Button – Changes the current channel
of the base station to the custom
frequency
 Current Channelization – Displays the
current channelization of the radio. The
base station and subscriber stations need