User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
62
Table 3-15. Subscriber Station Status Page
Field/Control
Description
1
Status
Status displays a subset of current settings.
 MAC Address – The IEEE 802.16 MAC address
of the base station
 Current Channelization – Displays the
channelization of the subscriber station.
 Current Channel – The current 802.16 specified
channel that the subscriber station uses for
transmit and receive.
 BS Estimated EIRP – Displays the estimated
EIRP of the base station that the subscriber
received from the base station. A value of N/A –
No Sync displays when the subscriber is not
connected to the base station.
 Tx - Provides the status of the transmit portion of
the unit. (On/Off) The status may be changed
on the Radio Control screen.
 Rx - Provides the status of the receive portion of
the unit. (On/Off).
 Transec Status – Displays the status of Transec
(on or off).
2
Board Details
Display Temperature
 CPU Temperature – Displays the temperature
reported by the processor in Celsius and
Fahrenheit
3
Front Panel
Displays PHY status on an interval basis.
 Base is a constant green light if the radio is
configured as a Base Station
 Sync is off on the base station when no
subscribers are registered and is illuminated
continuously when subscribers are registered.
 Recv is green when the radio is receiving
messages
 Xmit is green when the radio is transmitting data
4
Tx/Rx Over the
Air Status
The first part of the Tx/Rx Status Table Displays the
receive status of each subscriber connection. The
second part of the table is the amount of data the BS is
transmitting to each active SS.
 Base Station Name - Contains the name of the
base station for which the information pertains
to.
 Current Modulation Type – Contains the current
modulation/FEC type for the subscriber
connection. The display show the modulation of
the receive frame at the time sampled.
 Rx Signal Strength: Contains an assessment of
the receive signal strength.