User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
63
Table 3-15. Subscriber Station Status Page
Field/Control
Description
 RSSI at LNA – Displays the average RSSI value
for the subscriber connection at the LNA. The
value is determined using the RSSI value seen
at the PHY card at the preamble and the values
entered in the GUI for the receive gain and loss
from the PHY card to the LNA. Values included:
Avg Rssi, Internal Rx Loss, Rx Cable Loss, LNA
 Service Flow – Identifies the service class of the
service flow for the connection.
 State – Displays the state of the connection.
The valid values are provisioned and active.
 Est User B/W (Mbits/sec) – Displays the
estimated bandwidth in megabits per second
being used by the connection in the transmit
direction.
 Est Allocated B/W (Mbits/sec) – Displays the
estimated bandwidth in megabits per second
being allocated to the connection in the transmit
direction.
 Service Flow Oversubscribed – Displays the
number of Ethernet packets dropped for that
specific service flow.
3.6.8.1. Subscriber Station Status Page in Receive Dual
When the user enables RX Dual on the Radio control page the second receive RSSI will be
reported on the RSSI1 column on the Tx/Rx Over the Air Status section.
Figure 3-46 SS OFDM Status Rx Dual
3.6.9. Subscriber Station Admin Page
The admin page for the subscriber station provides the capability to enable and disable Transec
and the selection of the Transec key. Account management, start script generation and software
download are also supported on the admin page.