User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
67
Table 3-17. Subscriber Station Admin Page Transec Key
 Vlan ID: Allows user to add a VLAN ID to IP
packets coming from radio. The radio will pass
VLAN tagged packets unmodified, so this does
not need to be set to allow VLAN packets to flow
through the radio. Only if communication to the
radio needs to have a VLAN ID.
 IPv6 Address (Optional) : Optional IPv6 address
for the Ethernet (Note : current release of EDL
does not support IPv6)
 IPv4 Default Gate (Opt) : Optional ability to
configure an IPv4 default gateway.
 IPv6 Default Gate (Opt) : Optional ability to
configure an IPv6 default gateway
 IPv6 Netmask (Optional) : Optional IPv6
netmask for IPv6 address (Note: current release
of EDL does not support IPv6)
 Enable/Disable Video Support Radio Buttons: If
the start script is being configured for a SS then
user has the option of enabling the video
software to run at start up. Currently not a valid
selection if the start script is being configured as
a BS
 Generate Script Button : Generates a new start
script for the unit with the values input in the
“Generate Bridging Start Script” section of the
Admin page. Once the script has been
generated, the unit must be rebooted or power
cycled for the new values to take effect. The
unit should not be power cycled while script
generation is in process.
3
Software Update
Allows user to select a signed package file provided by
the manufacturer to update the software on the unit.
 File Path – Allows users to browse to location
where the package file resides.
 Start Update - Selection of the start update
button starts the software update using the
factory signed package file specified in the File
Path. Once the update process begins, any
interruption can render the box unusable and
require its return to the factory.
3.6.10. Subscriber Network Config Page
The Network Config page on the subscriber contains the class rule information received from the
base station.