User's Manual

Location Receiver Installation | 11
Mounting the Location Receiver
The Location Receiver shall be mounted vertically with the LEDs panel
pointing to the bottom. The unit (and antennas) shall be stable during
normal operation.
The unit should be installed in a ventilated area not exposed to direct sun.
Do not to install the unit near heat sources and/or other RF antennas.
The Location Receiver should be firmly mounted on a fixed surface using
two screws. You can either mount the Location Receiver directly with the
mounting holes at the back of the unit or use the mounting plate that is
supplied with the unit.
Figure 4 shows the Location Receiver mounting plate and the Location
Receiver back panel mounted on it.
Figure 4. Location Receiver Mounting Plate
Positioning the Antenna
When connecting the dipole antennas included with the Location Receiver,
ensure that they are positioned vertically, up or down.
When connecting any other antenna, ensure that it is compatible with the
SMA connector or use a suitable RF cable.