User's Manual

AeroScout EX5100 Exciter
Chaining Exciters 13
When using this injector, the power jack of the Exciter will not be used.
Figure 5: Single-Port Injector
The injector’s IN connector is connected to the network. The injector’s OUT
connector is connected to the Exciter’s LAN connector (connector 1 in Error!
Reference source not found.).
The injector can be used for both networked and non-networked Exciters. In case of
a non-networked Exciter, the IN connector on the injector is not used.
Note
An injector can provide enough power for one Exciter only. When using
the injector with chained Exciters, an injector must be connected to
every single Exciter in the chain. In addition, the LAN connectivity that
the injector supplies, is not to be utilized for slave Exciters in a chain.
110VAC/220VAC to 48VDC Power Supply Adaptors
These adaptors convert 110VAC or 220VAC inputs to 48VDC