User's Manual

AeroScout EX5100 Exciter
Chaining Exciters 14
Figure 6: 110VAC to 48VDC or 220VAC to 48VDC Adaptor
The adaptor is connected to the Exciter’s power jack). The network should be
connected separately to the Exciter’s LAN connector (connector 1 in Error! Reference
source not found.). This adaptor is most common for chained Exciters. It can be used
for supplying power to up to three Exciters.
Power Connection Summary
The following table summarizes the power connection options:
Power supply
Input
Output
Maximum
Current
Available
Power
Maximum #
of Exciters
with one
source
POE single port
injector
100-240V
AC 50-60Hz
48VDC
0.32A
(1)
15.4W
1
Standard POE
802.3af switch
port
(2)
-
48VDC
0.32A
(1)
15.4W
1
External power
source
-
48VDC
>1A
>48W
3
(3)
Note
Cable losses are included assuming cables are less than 100m long.
The POE class should be 0. The Exciter port cannot support power
required by more than three Exciters.