User's Manual

AeroScout EX5100 Exciter
Appendix A. Slave Exciter Configuration Tool 27
Appendix A. Slave Exciter Configuration Tool
This appendix describes the Slave Exciter EX5100 Configuration Tool, which is
designed to configure Exciters EX5100 as slaves in a chained Exciter configuration.
Note
Starting from AeroScout Engine version 4.3, the tool is part of the
Engine.
Installation
To install the tool, run "AeroScout Slave Exciter EX5100 Configuration Tool.msi" and
follow the instructions displayed on the screen.
Activation
1. If AeroScout Engine or AeroScout Network Exciter Manager is installed, stop
the corresponding services.
2. Launch the tool.
Its main window appears.
Figure 18: Activation – Single Exciter