Configuration Guide
Table Of Contents
- Introduction
- Exciter Applications and Industry Examples
- Exciter Features
- LED Status Indicators
- Exciter Connector Panel
- Wiring the Exciter
- LF Coverage
- Network and Power Connections
- Chaining EX5210R Exciters
- DHCP
- Resetting the Exciter IP Address
- Mounting the Exciter
- Appendix A: Exciter and Accessories
- Appendix B: Exciter Specifications
EX5210R Exciter Installation & Configuration Guide
12
Wiring the Exciter
When wiring the Exciter, all cables must be pushed through the removable
cable rubber plug and then connected to the required port. Use the cable
holder to keep the cables in-line with the rubber’s holes.
Once the cables are connected correctly, place and screw in the mounting panel.
Make sure the mounting panel is secured and sealed correctly before mounting
the Exciter.
Cable Holder
Cable
Rubber Plug
TB-L
IN
OUT
TB-R
PWR
LAN / PoE