Configuration Guide
Table Of Contents
- Introduction
- Exciter Applications and Industry Examples
- Exciter Features
- LED Status Indicators
- Exciter Connector Panel
- Wiring the Exciter
- LF Coverage
- Network and Power Connections
- Chaining EX5210R Exciters
- DHCP
- Resetting the Exciter IP Address
- Mounting the Exciter
- Appendix A: Exciter and Accessories
- Appendix B: Exciter Specifications
EX5210R Exciter Installation & Configuration Guide
25
Mounting the Exciter
Position and mount each EX5210R Exciter in the site according to the site survey
recommendations.
The EX5210R Rugged Exciter is designed for outdoor mounting using a
specifically designed mounting plate. Mounting options include:
Walls
Ceilings
Polls
Fixing the Exciter to a Wall/Ceiling
1. Using the mounting plate as a template, place and hold the mounting plate
to a wall or ceiling surface.
2. Mark the screw holes that will be used for mounting.
3. Drill the holes for the screws.
4. Mount the Exciter mounting plate using the correct screws and anchors
required for the mounting surface.