User's Manual Part 1

User and Deployment Guide

EX5700 Controller Firmware Upgrade

Controller firmware upgrade involves the following steps:

x Setting up the PC from which the Controller firmware upgrade is performed

and installing the AeroScout Location Engine (ALE)

x Configuring the AeroScout Location Engine

x Adding the Controller to the Engine configuration

x Performing the upgrade

Setting up the PC

1. Install Engine 5.0 SP4 Manager and Server (non-Cisco platform).

2. Connect the PC-to-LAN connector of the Controller.

3. Set the PC to static IP in the same subnet as the Controller. The

Controller default IP address is: 192.168.1.178.