User's Manual Part 1

User and Deployment Guide

Function Button Options

Note

The Visitor and Bypass codes and the time period that the door is open

can be changed in the WanderGuard BLUE Manager. The Alarm Reset

code can also be changed in the WanderGuard BLUE Manager. See

Settings in the Controller Configuration chapter of this User Guide.

Function buttons activate the designated function (Access Granted, Alarm Reset)

after the preset PIN code is entered by a staff member on the Indoor Keypad.

These functions are accessed by keying in the numerical code and then pressing

the designated Letter button (A or B) on the Keypad.

Note

The C and D buttons are reserved for future use.

Function Button A – Access Granted

This function is used together with the Visitor Code or Bypass Code to open the

door. The following are the default codes:

Bypass code – 0000A

Visitor code – 0001A

Entering one of these codes opens the door, and the Indoor Keypad

simultaneously displays an Access Granted message. The Access Granted

function stays active for the designated time period (the default time period is

five seconds).

x Access Granted (Visitor)