User's Manual Part 1

User and Deployment Guide

Indoor Keypad Firmware Upgrade

A PC application is used to upgrade the Indoor Keypad firmware.

The following are firmware upgrade preliminary steps:

x Install the application on the PC

x Install the driver for the micro-USB

Connect the PC to the Indoor Keypad by the micro-USB connector at the back

panel of the Keypad using the dedicated cable. The cable SKU is:

WGB-UPCAB-KPD-1000.

Do the following to upgrade the Indoor Keypad firmware:

1. Open the application and from the main menu, select the following type

of connection: Debug port

2. From the Properties menu, select virtual Com port (the adapter creates

virtual COM-port on the PC). The following communication needs to be

defined:

x Baud-rate 115200

x 8 data bits

x 1 stop bit