User's Manual Part 2

User and Deployment Guide
89
The list is sorted by RSSI level.
Best Practice: WanderGuard BLUE Manager can connect to only one
Controller at a time.
Click the Connect/Disconnect toggle ( / )to connect/disconnect
from a Controller.
Click to establish a BLE connection AND have the Controller blink
for five seconds.
Controller blinking is useful to confirm that you are connected to the
Controller to which you want to be connected (if there is more than
one Controller in the vicinity).
If you try to connect WanderGuard BLUE Manager to a new Controller
while the application is still connected to another Controller,
WanderGuard BLUE Manager will first disconnect from the current
Controller and only then connect to the new Controller.
In order to view the Controller to review its configuration, tap the Controller
line in WanderGuard BLUE Manager. The Controller Settings page opens after
WanderGuard BLUE Manager has made a successful BLE connection to the
Controller.
Controller Configuration
WanderGuard BLUE Manager allows you to configure the Controller after
connecting to it.
To configure the Controller:
x Obtain the Controller's configuration by performing a scan, and display it in
the WanderGuard BLUE Manager (open the Controller tab)
x Modify the desired parameters in WanderGuard BLUE Manager
x Save (Apply) the modified configuration from the WanderGuard BLUE
Manager to the Controller