User's Manual Part 2

User and Deployment Guide
93
List of Possible Errors from the Controller:
x Communication error with Keypad
x FW upgrade failure of UD BLE module
x FW upgrade failure of BD BLE module
x UART failure with UD BLE module
x UART failure with BD BLE module
x Relay2 physical activation failed
x Relay1 physical activation failed
x External LF error detected
x Internal LF error detected
x External LF antenna is disconnected
x Internal LF antenna is disconnected
x BLE monitoring error
Clock Settings
Use the Clock Settings page to update the time, date, Time Zone and Daylight
Savings Time (DST). Clock settings are used by the Controller to enforce the
Day/Night mode schedule.
The time (shown on the Clock Settings page) is updated once per minute.
Choose the device by selecting Choose Controller Time or Choose Tablet Time.
The default view on the WanderGuard BLUE Manager is Controller Time. Time is
shown by time of day, date and Time Zone.
In the Clock Settings page, you can do the following:
x View Controller Time
x View Tablet Time
x Apply the Tablet Time, Date and Time Zone to the Controller
x View and change Daylight Savings Time settings for the Controller
Best Practice: Initial setup requires setting the time of both the
Controller and Tablet.
In addition to initial setup of the Controller, it is recommended to adjust
the Controller clock once every six months.