User's Manual Part 2

User and Deployment Guide
99
Outputs
The Controller has two programmable outputs – Outputs 3 and 4. These outputs
can be programmed to be activated when a Controller mode changes or event
occurs. When the event is cancelled or the Controller mode changes back to its
previous mode, the output is deactivated.
Outputs can be an alarm or bell, flashing light, etc., depending on the mode
and desired result.
The Controller’s terminal block has the following outputs (see the Controller
chapter
in this Guide for more details):
x Controller's OUT3 – WanderGuard BLUE Manager's programmable Output 3
x Controller's OUT4 – WanderGuard BLUE Manager's programmable Output 4