User's Manual Part 2

User and Deployment Guide
100
The following output activation options can be set:
x None (disabled)
x Bypass mode
x Alarm mode
x Override mode
x Night mode
x Loitering (if LF and Loitering are enabled)
x Door Ajar (if Door Ajar is enabled)
x Visitor mode (if Visitor mode is enabled)
To activate a Programmable Output option:
1. Click Scan button in WanderGuard BLUE Manager to generate a list of
Controllers in your range.
2. Click Connect to connect to the Controller of your choice.
3. The Settings page opens by default for the Controller that you chose.
4. Click Outputs in the vertical navigation bar to open the Outputs page.
5. On the Outputs page, select your desired mode in the Controller Mode
or Event pull-down menu.
6. In Programmable Output 3, click the Activated/Deactivated toggle.
7. Repeat step 5 and 6 for Controller Mode or Event and Programmable
Output 4, as necessary.
8. Click Apply to save any changes to the current Controller.