User's Manual Part 2

User and Deployment Guide
102
Note
The combination of names (first, middle, last) must be unique.
To Add a New User:
1. Click Scan in WanderGuard BLUE Manager to generate a list of
Controllers in your range.
2. Click Connect to connect to the Controller of your choice.
3. The Settings page opens by default for the Controller that you chose.
4. Click Users in the vertical navigation bar to open the Users page.
5. On the Users page, click the New User icon.
6. Fill in the name fields and the PIN code.
7. Click Done to finish or Cancel to disregard your work. Pressing Done
validates the new user or reports errors if the entered data is not
compliant.
8. Click Apply to save any changes to the current Controller.