User's Manual Part 2

User and Deployment Guide
103
To Edit Users in the Controller:
1. Click Scan in WanderGuard BLUE Manager to generate a list of
Controllers in your range.
2. Click Connect to connect to the Controller of your choice.
3. The Settings page opens by default for the Controller that you chose.
4. Click Users in the vertical navigation bar to open the Users page.
5. On the Users page, tap to select your desired user from the list. Fill in the
name fields and the PIN code.
6. Click Done to finish or Cancel to disregard your work. Pressing Done
validates the modified user entry or reports errors if the entered data is
not compliant.
7. Click Apply to save any changes to the current Controller.