User's Manual Part 2

User and Deployment Guide
129
3. Drill 2 holes* in the designated for installation ceiling tile for the Screws (E).
Use the assembled 512HD Bracket (D) to mark the location of the holes.
* Holes should be 5/16” or 8 mm in diameter
4. Mount the Assembled 512HD Bracket (D) on the tile. Fix in place 2 Nuts (G)
on each of the Screws (E) leaving enough screw length (2/5” or 10 mm) to
mount the Adaptor.
5. Mount the Adaptor using 2 Nuts (G) using a 7/16” nut driver.