User's Manual Part 2

User and Deployment Guide
138
2. Assemble the Screws (F) on the Adaptor. Lock each Screw (F) with Hex Nut
(G) *Nuts should be loose at this step to allow easy insertion into the slotted
grid.
3. Mount the Adaptor (A) onto the Slotted-Grid by sliding the screw heads,
Screw (F), through the slots.
4. Fasten the Adaptor to the Screws (F) by tightening Nuts (G) to their final
position using a 7/16" Nut Driver.