User's Manual Part 2

User and Deployment Guide
140
11
Appendix B: Mounting the EX5700
Controller – Wall Mounting
This appendix contains wall mounting instructions and options for the EX5700
Controller.
Wall (and Ceiling) Mounting Using the Plastic
Adapter
The EX5700 Controller is shipped with a mounting plate (plastic adapter). The
adapter can be used for Wall Mounting. It can also be used for Ceiling
Mounting when there are hard ceilings at the facility.
1. Hold the adapter on the wall/ceiling in the location you wish to mount
the Controller. Make sure the adapter is level.
2. Mark the four holes for the screws through the template.
3. Remove the adapter.
4. Drill the holes for the screws.
5. Anchor the screws into the wall, leaving 10 mm of each of the screws
exposed. Use appropriate screws and or anchoring plugs.
6. Mount the plastic adapter to the wall.
7. Attach the Controller to the Adapter.