User's Manual Part 2

User and Deployment Guide
141
Wall Mounting Using a Template
The EX5700 Controller is shipped with a mounting template that can be used to
measure the holes for mounting the Controller on a wall. The mounting adapter
supplied with the Controller is not required in this option.
1. Hold the template on the wall in the location you wish to mount the
Controller. Make sure the template is level.
2. Mark the four holes for the screws through the template.
3. Remove the template.
4. Drill the holes for the screws.
5. Anchor the screws into the wall, leaving 10 mm of each of the screws
exposed. Use appropriate screws and or anchoring plugs.
6. Mount the Controller with the STANLEY Healthcare logo facing up, onto
the 4 screws. The Controller's back panel has 4 mounting brackets for
this purpose.