User's Guide

10
Alarm and Status Indicators
Alarm and Status Indicators
Reset Button Red LED
The Reset Button flashes red to indicate that a pad exit has
occurred. The alarm LED is easily seen from a distance of 4
meters (13 feet) in normal facility
lighting conditions. The Alarm State Indicator is red at this
time as well.
Reset Button Green LED
The Reset Button flashes green while it is being armed and in
monitoring mode with the illumination settings of “1” or”2.”
When operated by external power,
the LED is constantly on. See “Illumination Intensity
(Lightbulb icon)” on page 13.
Reset Button Amber LED
The Reset Button flashes amber to indicate Hold or
Suspend Modes. Amber flashes once every 1 second in
Hold mode and once every 2 seconds in Suspend
mode. In the last 5 seconds of Suspend mode, it flashes twice per second.
Status Indicator Icons
Based on the selected delay, the icon’s green
LED illuminates as follows:
• Delay is set to ‘0s’ – no icon is illuminated
• Delay is set to ‘1s’ – the ‘1s’ icon is
illuminated
• Delay is set to ‘2s’ – the ‘2s’ icon is illuminated
When connected to external power, the corresponding LED
illuminates constantly.
When powered by batteries only, the corresponding LED blinks once every 3
seconds.