User's Guide

Using Sensormat Pads

Note: The monitor has the ability to connect two pads at one time,

but is intended to only monitor a single patient/resident with the

other pad available for transfer of the patient/resident from one pad

to the second. A Negative Confirmation Tone is sounded if weight is

placed on both connected pads at the same time.

Sensormat pads are designed to sense body-weight distributed over an area.

Place the Sensormat pad either on a bed or chair, directly underneath the

patient/resident.

Only use Sensormat pads manufactured by STANLEY Healthcare for

use with the M200 Monitor. See “Other Components Sold

Separately” on page 1.

Pad testing should be done either by sitting or lying on the pad, or by

pressing down firmly with the palm of your hand.

For more information on pad testing see “Testing the Sensormat

Pads” on page 20.

Note: Pads are for single patient/resident use and should be replaced on

or before their warranty period expiry date (calculated from date

of In-Use).

Refer to each pad’s instructions for use printed on the pad.