User's Guide

15
Using Sensormat Pads
Bed
Place the Sensormat pad across the width of the bed, on top of the mattress.
A top sheet and/or incontinence pad may be placed above the Sensormat pad.
The preferred pad location is directly under the patient/resident’s buttocks
8 to 13 cm (three to five inches) below the bend in the mattress when the
head of the bed is elevated.
Effective operation of the Sensormat pad in the alternative location, behind
the patient/resident’s back, is dependent upon their weight and the
articulation angle of the bed.
Sensormat pads may not be effective with all air-type bed mattresses, and
effectiveness may be impacted by the patient/resident’s weight. Test before
using. See “Testing the Sensormat Pads” on page 20.
The use of anti-skid strips to secure the Sensormat pad to the mattress
is optional.
Chair/Wheelchair
Place the Sensormat pad across the width of the chair or wheelchair seat. For
best sensitivity, place the Sensormat pad above any other pads. An
incontinence pad may be placed above the Sensormat pad.
Adjust the position so that it fits directly under the patient/resident’s buttocks.
The most favorable location is toward the rear of the seat, close to the chair
back.
Sensormat pads may not be effective with all air-type chair cushions, and
effectiveness may be impacted by the patient/resident’s weight. Test before
using. See “Testing the Sensormat Pads” on page 20.
The use of anti-skid strips to secure the Sensormat pad to the seat of the chair
is optional.
Toilet
Ensure the toilet seat is clean and dry. Place the adhesive towards the seat ring,
positioning it between the seat and the bowl.
Test the Toilet Sensormat pad before each use. See “Testing the
Sensormat Pads” on page 20.