User's Guide

Monitor Mounting/Installation Options
27
Monitor Mounting/Installation
Options
The monitor may be mounted on a chair, wall, bed footboard or
headboard, or a wheelchair.
WARNING: Do not place the monitor within 0.3 meters (1 ft.) of and
facing the patient/resident. However, placing the monitor on
a wheelchair back is acceptable as long as the monitor is
facing away from the patient/resident.
Wall Mounting
To mount the monitor on a wall, use a Wall Mount Bracket Kit
(WMB-1000 - provided with the monitor).
The mounting bracket should be attached to the wall with the included
screws or Dual-Lock fasteners.
If using a Nurse Call system, a ¼” plug connected Nurse Call cable is also
required. A grey 8 ft ¼” plug to ¼” plug cable is available separately from
Stanley Healthcare (0707-569).
1. Select a flat surface for Monitor installation, where staff can easily
reach the monitor and where pads and other required accessories
can be connected.
2. Attach the Wall Mount Bracket using screws, or Dual-Lock
fasteners for easier removal.
3. Strain relief should be used with the Pad cords and/or Nurse
Call cable as shown here:
To Nurse Call
To Pad
4. Slide the monitor down into the bracket from the top until the
release button clicks.