Operation Manual Part 2

Aerosoft – Digital Aviation
CRJ-70 & CRJ-900
AOM PART 2
Systems Description
VOL
5
5-1-7
26-Jul-2017
The EICAS status page displays the following information:
1. Flight control trim indications
2. Auxiliary power unit (APU) indications such as APU
RPM, exhaust gas temperature (EGT) and APU inlet
door status
3. Pressurization data such as cabin altitude, cabin rate
of change, cabin pressure differential, and landing
field elevation
4. Oxygen system pressure
5. Brake system temperature readouts
6. Crew alerting system (CAS) messages in the form of
green advisory and white status messages
• Aircraft systems synoptic pages (via the EICAS
control panel)
See next section for more details
• MENU page (via the EICAS control panel) allows
reset of the fuel used indicator and displays the
engine oil quantity
See respective section of this chapter.
EICAS CONTROL PANEL
The EICAS Control Panel enables you to open the
different aircraft system synoptic pages.
The panel itself is found on the upper pedestal. The
following pushbuttons, respective system pages are
available:
• PRI: Opens Primary Page (normally displayed on ED1) on secondary display (ED2)
• STAT: Displays Status Page. A second push removes all status messages / open further status
messages if several pages of status messages exist.
• Synoptic Pages
o ECS: Opens Environmental Control System page
o HYD: Opens Hydraulic system page
o ELEC: Opens Electrical system page
o FUEL: Opens Fuel system page
o F/CTL: Open Flight Controls system page
o A/ICE: Opens Anti-Ice system page
o DOORS: Opens Door system page
o MENU: Opens the menu page
• SEL: Selector – used to activate a selected item. A change in colour will indicate selection
• CAS: Removes caution messages from primary display. Previously invisible messages get displayed
• UP: Controls cursor
• DN: Controls cursor
• STEP: Steps through pages of secondary page if available