User manual

I
GB
Important :
Before using the compressor, always read the instructions handbook and consult
it if you have any doubts regarding compressor functioning.
Important:
Safety goggles MUST be worn when using the compressor.
Warning:
Parts of the compressor may become very hot.
Warning:
The compressor operates according to an automatic on/off cycle and may
therefore restart in the case of a blackout and subsequent power-up.
Warning:
Always use sockets with a ground connection to avoid the risk of electric shock.
PRECAUTIONS
Never direct the jet of air towards persons, animals
or your body. (Always wear safety goggles to protect
your eyes against ying objects that may be lifted by
the jet of air).
Never direct the jet of liquids sprayed by tools
connected to the compressor towards the
compressor.
Never use the appliance with bare feet or wet hands
or feet.
Never pull the power cable to disconnect the plug
from the socket or to move the compressor.
Never leave the appliance exposed to adverse
weather conditions.
Never transport the compressor with the receiver
under pressure.
Do not weld or machine the receiver. In the case of
faults or rusting, replace the entire receiver.
Never allow inexpert persons to use the compressor.
Keep children and animals at a distance from the
work area.
Do not position ammable or nylon/fabric objects
closed to and/or on the compressor.
Never clean the compressor with ammable liquids
or solvents. Check that you have unplugged the
compressor and clean with a damp cloth only.
The compressor must be used only for air
compression. Do not use the compressor for any
other type of gas.
The compressed air produced by the compressor
cannot not be used for pharmaceutical, food or
medical purposes except after particular treatments
and cannot be used to ll the air bottles of scuba
divers.
The compressor must be used in suitable
environments (well ventilated with an
ambient temperature of between +5°C and
+40°C) and never in places affected by dust,
acids, vapors, explosive or ammable gases.
Always maintain a safety distance of at least 3
meters between the compressor and the work
area..
Any coloring of the plastic protection of the
compressor during painting operations indicates
that the distance is insufcient.
Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
For three-phase versions have the plug tted by a
qualied electrician according to local regulations.
The rst time you start the compressor, check that
the direction of rotation is correct and matches that
indicated by the arrow on the conveyor (Fig. 1,
the air must be conveyed towards the head of the
compressor):
Use extension cables with a maximum length of 5
meters and with a cable cross-section of not less
than 1.5 mm
2
.
Use of extension cables of different length and
cross-section and also of adapters and multiple
sockets should be avoided.
Always use the handle to move the compressor.
When operating, the compressor must be placed
on a stable, horizontal surface to assure correct
lubrication (lubricated versions).
THINGS TO DO
DIRECT DRIVE COMPRESSOR
THINGS NOT TO DO
CTD2002-Versione INGLESE.indd 21/11/2002, 17.548