Use and Care Manual

No. 1201 - 08/18
SURVEY MARKING PAINT
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Features: Aervoe Survey Marking Paint is the best
marking paint of its kind. It is packaged so that is
operated only in an upside down position. It provides
exceptional quality in terms of initial color brightness, color
retention, adhesion, durability, and color consistency. It
is formulated with superior quality raw materials to meet
the requirements of the most demanding professional.
Although the optimum operating temperature range is
50°F to 90°F (10°C to 30°), the product contains a freeze
point depressant which will allow it to function with a
reduced delivery rate down to 15°F (-10°C).
Benets: Colors meet standards set by OSHA and
APWA/One Call Systems. It is not affected by moisture
or water and it will not wash away once dry. It may be
used with the cap on in Aervoe applicators #244/245.
The spray-through cap eliminates accidental discharge.
Each can is non-clogging and empties completely. High
delivery (HD) tip and valve system offers expeditious
product delivery, which saves time and provides better
coverage than regular delivery products. Regular colors
will last up to 6 months, and uorescent colors will last 3
to 6 months depending on trafc and exposure.
Uses: Designed to adhere to most surfaces, including
pavement, gravel, and soil. It is ideal for use in surveying,
utility identification, and other long term marking
applications. This product is not recommended for use
on short cut grass such as golf course greens.
Application: For aerosol application, shake can well
before use and for 1 to 2 minutes after agitator ball is
heard. Remove tab from tamper-resistant cap. With
proper alignment of the activator bar, this product may
be used with the cap on in Aervoe applicators #244/245.
Apply paint 3 to 4 inches from surface as a writing tool,
and 5 to 8 inches in the applicator for a 3/4-inch line or
continuous directional mark. Keep can in motion during
use to prevent puddling. Agitate can periodically during
application. Clear paint from valve and tip after each
use by turning can in an upright position and spraying
for 3 to 5 seconds. For best results, use at temperatures
between 50°F and 90°F (10°C to 32°C). Bulk paint may
be applied in a conventional air spray system or airless
pressure sprayer.
Limitations: Please refer to the Safety Data
Sheet for specific information on material hazards,
etc. This aerosol product is designed to spray
at an angle not greater than 30° from vertical. Do not
use on turf surfaces. Please check your local air quality
standards before using any bulk paint.
Packaging:
Aerosol: Cans (20 oz.) All colors except #210 - 17 oz. net wt. (482 g) 19.0 . oz. (562 ml)
#210 Silver - 15 oz. net wt. (425g) 19.25 . oz. (569 ml)
Case - 12 cans/case 18 lbs. (8.2 kg) 0.55 CF (0.016 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
Aerosol MIR 0.85 VOC <66% - Ground Trafc Marking
201 RED
202 YELLOW
203 BLUE
204 GREEN
205 ORANGE
206 BLACK
207 WHITE
208 HI VIS YELLOW
209 LIGHT BLUE
210 SILVER*
212 PURPLE
220 FL. RED
222 FL. ORANGE
224 FL. GREEN
226 FL. YELLOW
227 FL. BLUE
229 FL. PINK
230 FL. RED-ORANGE
280 CONCRETE GRAY
281 H.D. RED
282 H.D. YELLOW
288 H.D. FL. ORANGE