Product Manual

No. 31072 - 03/13
FAULT-FINDER
®
PENETRANT
PRODUCT NUMBERS: 1072 8.5-OZ. NET WT. AEROSOL
I. GENERAL DESCRIPTION
Description: Fault-Finder Penetrant contains no chlorine
or sulfur bearing solvents. Group 1 was developed
specically for testing materials where halogenated safety
solvents are not permitted.
Benefits: Conforms to MIL-I-25135. Meets residual
chlorine and sulfur requirements of NAVSHIPS 250-1500
and MIL STD 271 (sec. 5.3.1). Provides a portable and
accurate inspection system. It's use is very versatile and
simple to use and affords immediate results.
Uses: Use on metals, glass and plastic 20 minutes before
applying developer.
Application: Pre-clean parts or surface with #1071
Cleaner. Apply a heavy wet lm and let soak. Wipe clean
and repeat as necessary. Dry thoroughly before using
Penetrant. Spray #1072 Penetrant on area and allow to
soak, up to 20 minutes. Remove while still damp. Wet
a cloth with # 1071 Cleaner and wipe surface to remove
surface Penetrant. Excess Penetrant may distort test
indications. Shake #1073 Developer thoroughly until
agitator ball rattle. Apply Developer holding can 8" to 12"
from surface. Developer may be applied immediately
after excess Penetrant has been removed, but not
longer than 10 minutes prior to visual inspection.
Cracks, pores, and faults will now be outlined in RED.
Invert can and spray momentarily to clean spray head.
Limitations: Please refer to the Safety Data Sheets for
specic information on material hazards, etc.
Packaging:
Aerosol: Cans (211x413) 8.5 oz. net wt. (241g) 10.1 . oz. (299 ml)
Case - 12 cans/case 11 lbs. (5kg) 0.18 CF (0.005CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]