Product Manual

No. 41170 - 12/13
PORTABLE SPEED BUMP
PRODUCT NUMBER:
I. GENERAL DESCRIPTION
Features: The Aervoe Portable Speed Bump is
designed for temporary placement on roads, parking
lots, warehouse oors, etc., to slow vehicle speed. It is
made of durable, impact and UV resistant polypropylene
and will not fade or crack. It can withstand 20,000
pounds and has black rubber pads on the bottom to
prevent sliding when being run over.
Each of the 26 yellow plastic body pieces has 2 high-
intensity reective strips for greater visibility. One end
of the Speed Bump has a heavy-duty handle to use to
unroll and maneuver it into position.
The Speed Bump extends to almost 10 feet and will roll
up into a 20” diameter for storage. Includes a heavy-
duty nylon storage bag with strap handles. It also comes
with an extra plastic hinge rod to link two Speed Bumps
together to span 20 feet.
Benets: A portable speed bump allows you to temporarily
reduce vehicle speed and relocate it to different locations
based on need.
Uses: Use in school zones, constructions sites, events,
warehouse oors, or anywhere a portable, temporary speed
bump is required to reduce speed.
Directions: Remove from the nylon bag and use the handle
to unroll. Flip it over so the rubber feet are on the bottom.
Using the handle, pull it into the desired location.
Warnings: Read operating instructions thoroughly prior to
use. Use caution when lifting.
Packaging:
Case: (1/case) 48 lbs. (21.8kg) 2.3 CF (0.07 CM) 20.5” L x 9.45” W x 20.5” H
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
1170 - PORTABLE SPEED BUMP