Product Manual
No. 41280 - 03/12
ANSI CLASS 2 SURVEYOR SAFETY VEST
PRODUCT NUMBERS: 1281 - FLUORESCENT YELLOW - LARGE
1282 - FLUORESCENT YELLOW - X-LARGE
1283 - FLUORESCENT YELLOW - XX-LARGE
1286 - FLUORESCENT RED ORANGE - LARGE
1287 - FLUORESCENT RED ORANGE - X-LARGE
1288 - FLUORESCENT RED ORANGE - XX-LARGE
I. GENERAL DESCRIPTION
Description: The Aervoe ANSI Class 2 Surveyor Safety Vest
is made of a 100% Polyester high-visibility mesh material. A
heavy-duty metal zipper secures the front closure and the
sides are adjustable with hook and loop straps. Two vertical
2" Scotchlite® reective stripes run front to back over the
shoulders and one horizontal stripe runs across the waist for
24-hour visibility. A front chest pocket stores a radio or other
items and a mic strap provides a method to attach a radio mic.
The vest also includes 2 other handy pockets. Complies with
the requirement of section 6.1 for Class 2 garments, 6.0, 6.3,
and 10 through 12 of ANSI/ISEA 107-2010.
Benefits: This vest is appropriate for moderate-risk
environments including poor weather conditions and trafc
approaching over 25 MPH.
Application: Surveying, highway and road construction, utility
work, emergency response, school crossing guards, forestry
operations, railway workers, airport ground crew/baggage
handlers, and delivery vehicle drivers.
Cleaning Instructions: Machine wash with warm water up
to 25 times. Tumble dry on low. No not bleach, iron, or dry-
clean.
Limitations: The reflective stripes on this vest enhance
visibility but cannot guarantee adequate visibility in all situations.
Weather conditions, your surroundings, and keeping the
reective material clean will contribute to overall performance.
Misuse and poor maintenance may reduce visibility and result
in serious bodily injury.
Packaging:
Each 9.12 oz. (0.26 kg) 8" W x 14" L x 1.5" H 1.0 CF (.003 CM)
12 vests/case 7.34 lbs. (3.3 kg) 8" W x 14" L x 18" H 1.17 CF (0.03 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
0HONEs&AXs#USTOMER3ERVICE
WWWAERVOECOMsMAILBOX AERVOECOM
Minimum areas of visible material - ANSI/ISEA 107-2010
Performance Class 3 Performance Class 2 Performance Class 1
Background material 1240 in
2
(0.80 m
2
) 775 in
2
(0.50 m
2
) 217 in
2
(0.14 m
2
)
Retroreective or combined-performance material
used in conjunction with background material
310 in
2
(0.20 m
2
) 201 in
2
(0.13 m
2
) 155 in
2
(0.10 m
2
)
Combined-performance material used without
background material
N/A N/A 310 in
2
(0.20 m
2
)
Minimum width of retroreective material 2 in (50 mm) 1.375 in (35 mm) 1 in (25 mm)
or
2 in (50 mm) combined-
performance material (without
background material)
Minimum number of yards per retroreective
material width
4.3 yds or 2 in (50 mm) width 4 yds of 1.375 in (35 mm)
width 2.8 yds or 2 in (50 mm)
width
4.3 yds of 1 in (25 mm) width
3.1 yds of 1.372 in (35 mm)
width 2.15 yds of 2 in (50 mm)
width
Photometric performance (consult the ANSI/ISEA
107-2010 standard for Tables 4 and 5)
Level 2 (Table 4) or Level 1
(Table 5)
Level 2 (Table 4) or Level 1
(Table 5)
Level 2 (Table 4) or Level 1
(Table 5)