Product Manual
No. 1246 - 2/08
CONSTRUCTION MARKING PAINT
Features: This quality marking paint is packaged in
a can that may only be operated in an upside down
position. It is formulated to meet a variety of mark-
ing applications while still providing good initial color
visibility, good color retention, and adhesion.
Benets: Provides great color durability for up to
3 months, depending on trafc and exposure. It
meets standards set by OSHA and APWA/ONE Call
Systems. It is not affected by moisture or water and
it will not wash away once dry. Can be used with the
cap on in Aervoe applicators #244/245. The spray-
through cap eliminates accidental discharge. Each
can is non-clogging and empties completely.
Uses: Designed to adhere to most surfaces, in-
cluding pavement, gravel, and soil. It can be used
for marking at construction sites, locator and utility
identication, landscaping, or other general marking
requirements. It is not recommended for use on short
cut grass such as golf course greens.
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Packaging:
Aerosol: Cans (211 x 713) 17 oz. net wt. (482 grams) 18.8 . oz. (557 ml)
Case - 12 cans/case 18 lbs. (7.8 kg) .55 CF (.016 CM)
Aerosol MIR 1.20 VOC<66%
246 - Fl. Red
247 - Fl. Orange
248 - Fl. Green
249 - Fl. Pink
250 - Fl. Blue
253 - Fl. Yellow
251 - Black
252 - Yellow
254 - Blue
255 - White
256 - Red
257 - Orange
Application: Shake can well before use and for 1 to
2 minutes after agitator ball is heard. Remove tab
from tamper-resistant cap. With proper alignment
of the activator bar, this product can be used with
the cap on in Aervoe applicators #244/245. Apply
paint 3 to 4 inches from surface as a writing tool,
and 5 to 8 inches in the applicator for a 3/4-inch line
or continuous directional mark. Keep can in motion
during use to prevent puddling. Agitate can peri-
odically during application. Clear paint from valve
and tip after each use by turning can in an upright
position and spraying for 3 to 5 seconds. For best
results, use at temperatures between 60°F and 80°F
(16°C to 27°C).
Limitations: Please refer to the Material Safety Data
Sheets for specic information on material hazards,
etc. This aerosol product is designed to spray at an
angle not greater than 30° from vertical.
258 - Hi Vis Yellow
259 - Green
260 - Purple
283 - H.D. Fl. Red-Orange