Product Manual

No. 1261 - 05/15
INVERT-A-CAP MARKING PAINT
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Features: Aervoe Invert-A-Cap Marking Paint is the best
marking paint of its kind. It is packaged in a can that is
operated only in an upside down position. It provides
exceptional quality in terms of initial color brightness, color
retention, adhesion, durability, and color consistency. It
is formulated with superior quality raw materials to meet
the requirements of the most demanding professional.
Although the optimum operating temperature range is
50°F to 90°F (10°C to 30°), the product contains a freeze
point depressant which will allow it to function with a
reduced delivery rate down to 15°F (-10°C).
Benets: Colors meet standards set by OSHA and
APWA/One Call Systems. Initial color brightness,
color retention, adhesion, durability, color consistency,
etc. It is not affected by moisture or water and it will
not wash away once dry. Can be used with the cap
on in Aervoe applicators #244/245. The spray-through
cap eliminates accidental discharge. Each can is non-
clogging and empties completely. Regular colors will last
up to 6 months, uorescent colors will last 3 to 6 months
depending on trafc and exposure.
Uses: Designed to adhere to most surfaces, including
pavement, gravel, and soil. It is ideal for use in surveying,
utility identification, and other long term marking
applications. This product is not recommended for use
on short cut grass such as golf course greens.
Application: Shake can well before use and for 1 to 2
minutes after agitator ball is heard. Remove tab from
tamper-resistant cap. With proper alignment of the
activator bar, this product can be used with the cap on in
Aervoe applicators #244/245. Apply paint 3 to 4 inches
from surface as a writing tool, and 5 to 8 inches in the
applicator for a ¾ inch line or continuous directional
mark. Keep can in motion during use to prevent puddling.
Agitate can periodically during application. Clear paint
from valve and tip after each use by turning can in an
upright position and spraying for 3 to 5 seconds. For
best results, use at temperatures between 50°F and 90°F
(10°C to 32°C).
Limitations: Please refer to the Safety Data
Sheets for specic information on material hazards,
etc. This aerosol product is designed to spray
at an angle not greater than 30° from vertical. Do not use
on turf surfaces.
Packaging:
Aerosol: Cans (211x604) 12 net wt. (340 g) 14.1 . oz. (417ml)
Case (12/case) 14 lbs. (6.35 kg) 0.47 CF (0.013 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
Aerosol MIR 1.2 VOC <66% - Ground Trafc Marking
261 - RED
262 - YELLOW
263 - BLUE
265 - ORANGE
267 - WHITE
270 - FL. RED
272 - FL. ORANGE
274 - FL. GREEN
275 - FL. RED-ORANGE
279 - FL. PINK