Product Manual

No. 13000DTM - 08/15
DIRECT TO METAL (DTM)
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Description: Aervoe Direct To Metal Water-Based Rust
Proong Paint is a high quality industrial maintenance
enamel coating formulated for mild to moderate interior/
exterior industrial exposures. This product offers lasting
protection against corrosion, light abrasion, weathering
and mild chemical fumes. Direct To Metal signies that
the product does not require a primer coat. In harsher
environments, 2 coats of DTM may be applied for
maximum protection.
Benets: This high quality industrial coating is VOC
compliant and will provide good resistance to moderate
environments including rain, fog, moisture. Excellent
temperature resistance to 200°F. Excellent gloss
appearance, high-hide coverage that provides corrosion
protection especially on metal surfaces. A primer is not
required and DTM can be applied over sound rusted
areas; however, loose akes, dirt, grease, oils, other
surface contaminants or particles should be removed rst
with a wire brush and chemical cleaning.
Applications: Ideal for equipment maintenance in
food plants, restaurants, schools and hospitals as well
as O.E.M. production. Exceeds many performance
standards of nationally recognized brands.
Use on galvanized or ungalvanized metal, wood and
other common surfaces including concrete (masonry) and
nonporous plaster. Excellent for use on motors, tools,
cabinets, pipelines, drums, conduit, ducts, furniture, steel
bars, railings, tool boxes, electrical equipment and safety
color coding.
Directions: For best results, surface must be clean,
dry and free of grease, rust, scale and any other loose
particles that could affect lm adhesion. A good acrylic
block ller is usually needed for masonry. Concrete
should be washed with commercial detergent before
application. Stir thoroughly and apply by brush, roller
or spray. Thinning: Generally not required for brush
or roller application. For spraying equipment, thin up
to 12% with water (refer to the Surface Preparation,
Application and Equipment Recommendation Sheet for
more information).
Limitations: Please refer to the Safety Data Sheet for
specic information on material hazards, etc. Please
check your local air quality standards before using any
bulk paint. Check all plastic surfaces for adhesion and
compatibility before use. Not recommended for water
immersion services. PROTECT FROM FREEZING.
Packaging:
Liquid Bulk: Case: 2 gallon cans (mt. rd.) 22 lbs. (10.0 kg) 0.50 CF (0.014 CM)
5-gallon pail (mt. rd.): 52 lbs. (23.6 kg) 1.20 CF (0.034 CM)
50-gallon drum (mt. rd.) 535 lbs. (242.7 kg) 8.50 CF (0.241 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
(775) 783-3100 Phone • (775) 782-5687 Fax • (800) 227-0196 Customer Service
www.aervoe.com • mailbox@aervoe.com
WATER-BASED RUST PROOFING PAINT - BULK (<100 G/L)
3010 - SAFETY RED*
3020 - SAFETY YELLOW*
3030 - SAFETY BLUE*
3040 - SAFETY GREEN*
3050 - SAFETY ORANGE*
3060 - SAFETY BLACK
Product number plus letter designation is as follows:
G = 2 one-gallon cans per case; F = 1 ve-gallon pail; D = 50-gallon drum
* OSHA Safety Colors
3070 - SAFETY WHITE*
3120 - FLAT BLACK
3130 - FLAT WHITE
3490 - METER GRAY (ANSI-49)

Summary of content (4 pages)