Product Manual

No. 15001 - 02/16
SUPREME COLOR SHIELD™ - AEROSOL
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Description: This superior coating is formulated for
industrial, commercial, or institutional applications where
surfaces are exposed to harsh environments including
moisture, U.V. Light exposure, chemicals, and extreme
temperatures. Supreme Color Shield is formulated with
the highest solids and pigment load to provide a top
performing industrial paint. Provides high gloss and
single coat coverage with excellent fade resistance and
long lasting corrosion protection. Available in 20 colors,
including 5 OSHA Safety colors and select factory
equipment touch-up colors.
Benets: Supreme Color Shield forms an impenetrable
barrier effective against rust and harsh environments.
Most colors provide full coverage in just one coat.
Tough nish resists cracking, chipping, and peeling.
This product exceeds many performance standards of
nationally recognized brands, saving you time and money.
Superior gloss and color retention. Optimum corrosion
protection even without primer. Perfect for large or small
projects. Heat resistant to 300°F (149°C). Acceptable as
a coating in federally inspected meat and poultry plants
for application to structural surfaces where there is a
possibility of incidental food contact.
Application: Use on bare metal, iron steel, aluminum,
wood, and masonry. Ideal for use on structural steel,
machinery, storage tanks, fencing, metal doors, outdoor
garden furniture, and equipment.
Directions: Align spray head with red mark on valve
rim to ensure complete evacuation. Before spraying,
shake can vigorously for at least one minute after rattle
of agitator ball is heard. Surfaces must be dry and free
of dust, dirt, oil, grease, wax and other contaminants
that would adversely affect paint adhesion. On bare
metal or lightly rusted surfaces, Zynolyte Multi-Purpose
Primer is recommended prior to nish color application.
Extremely slick, glossy surfaces should be lightly sanded.
Wipe surface with tack cloth to remove debris. Use only
when can temperature is between 60°F and 80°F (16°C
and 27°C). Mask and protect areas not to be sprayed to
reduce clean up. Hold can 8 to 14 inches from surface
to be coated, and press spray head rmly. Use steady,
even strokes while spraying. Two light coats are better
than one heavy coat. Wait one to two minutes before
recoat. Spray in well ventilated area. To prepare can for
storage, turn can upside down and press spray tip for 2
to 3 seconds to clear paint from valve and tip.
Limitations: Please refer to the Safety Data Sheet for
specic information on material hazards, etc. Please
check all plastic surfaces for adhesion and compatibility
before each use.
Packaging:
Aerosol: Cans (211x713) 15 oz. net wt. (425 g) 17 . oz. (503 ml)
6 cans/case 8 lbs. (3.64 kg) 0.29 CF (0.008 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
CARB VOC/MIR: FLAT <60%/1.20; NON-flat <65%/1.40; METALLIC <80%/1.90
5001 - ALUMINUM
5004 - SAFETY BLUE
5006 - SAFETY GREEN
5007 - HUNTER GREEN
5008 - SAFETY YELLOW
5010 - SAFETY ORANGE
5012 - SAFETY RED
5014 - SAND
5016 - FLAT BLACK
5017 - BLACK
5018 - FLAT WHITE
5019 - WHITE
5020 - LIGHT GRAY (ANSI-61)
5049 - METER GRAY (ANSI-49)
5050 - PADMOUNT GREEN