Product Manual

No. 15310 - 02/15
PROFESSIONAL CHOICE
FOREST BOUNDARY MARKING PAINT
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Description: Aervoe’s Professional Choice Forest
Boundary Marking Paint is a heavily-pigmented product
that provides visual identication at a great distance. A
fan spray tip applies a wide mark to easily designate
forest boundaries.
Benets: Provides high yield with excellent surface
adhesion, fast application, and will not soak into the wood.
Application will produce an 8" wide mark at a distance of
6-8 inches. The fan spray tip can be adjusted to produce a
vertical or horizontal 8" wide mark. All colors are lead-free
for safest application and environmental consideration.
Does not contain ozone depleting substances.
Application: May be used in wet or dry conditions. Use
to mark the forest boundary on standing trees.
Directions: Aerosol Application: The adjustable fan
spray tip may be rotated 90° either right or left, to produce
a horizontal or vertical 8" wide mark, when sprayed 6-8
inches from surface. Can be applied to any dry or wet
surface that is somewhat clean and free of mud or other
material, including running water that may block adhesion.
For best results, use at temperatures between 32° and
100°F (0° and 38°C). Align spray head with black mark
on valve rim to ensure complete evacuation of contents.
Shake can vigorously for at least one minute after agitator
ball rattles, and intermittently during use. Recoating is
not necessary. Prepare can for storage by turning upside
down and spraying for 2 to 3 seconds. If clogging occurs,
turn spray tip 1/4 turn; if it persists, remove and clean
slot on tip. Never stick a pin or any other object into tip
opening or into stem. Replace spray tip with a gentle,
twisting motion, making certain the tip is pointed away
from you. Bulk Application: Mix thoroughly and apply at
full strength with a brush or tree marking gun. Thinning
is not required at normal temperatures but in extremely
cold weather, thinning may be required and should be
added into mixture (shake well) before attaching gun.
Quart containers: Unscrew cap and attach directly to
tree marking gun. Product is ready for use. Leave gun
attached to can for trouble-free daily operation. Whenever
gun is not to be used for several days, clean and ush
thoroughly with solvent. Gallon containers: Tree marking
guns will attach directly to spout or container can be used
in backpack style applicators designed to hold oblong
gallon cans. Pails & Drums: Mix thoroughly using an
appropriate method (drill mixer or pail shaker for pails,
air mixer for drums) then transfer paint to the desired
container. If thinning is required, do not thin in the original
container.
Limitations: Please refer to the Safety Data Sheet for
specic information on material hazards, etc. Product is
extremely ammable, and is intended for outdoor use
only.
Packaging:
Aerosol: Cans (211x713) 15 oz. net wt. (425 grams) 16.9 . oz. (500 ml)
12 cans/case 16 lbs. (7.3 kg) 0.55 CF (0.016 CM)
Bulk: 1 case of 12 quarts (mt. rd.) 24/36 lbs. (10.9/16.3 kg) 1.8 CF (0.05 CM)
1 case of 2 gallons (mt. rd.) 25/34 lbs. (11.3/15.4 kg) 0.26 CF (0.007 CM)
5 gallon pails (mt. rd.) 43/51 lbs. (19.5/23.1 kg) 1.2 CF (0.034 CM)
50-gallon drum (mt. rd.) 432/512 lbs. (196/232.2 kg) 8.5 CF (0.24 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
Aerosol MIR/PWR <1.20 Flat Coating (FCP)
5355 - DARK BLUE
5380 - PURPLE
5310 - RED
5320 - ORANGE
5330 - YELLOW
Product number plus letter designation is as follows:
Q = 12 one quart cans per case; G = 2 one-gallon cans per case; F = 1 ve-gallon pail; D = 50-gallon drum