Product Manual

No. 16001 - 03/13
TOOLMAKER'S INK BLUE
PRODUCT NUMBERS: 6001 12-OZ. NET WT. AEROSOL
I. GENERAL DESCRIPTION
Description: Toolmaker's Ink enables you to perform
accurate scribing without glare. It is a fast drying lm that
won't peel, ake or rub off.
Benets: Will provide excellent adhesion to metal, glass,
or plastic. You can scribe the surface using a shop tool
within 5 minutes of application. Toolmaker's Ink is easily
removed with 6095 Toolmaker's Ink Remover.
Application: Use for production layouts, pattern making,
tool, die, and model making. May be used for templates
and machined parts.
Directions: For maximum adhesion, the surface must
be clean, dry and free of grease, rust, scale or any
other loose particles. This product should be used at
temperatures between 55° and 80°F (13° and 27°C) for
best results. Align the spray head with black dot on valve
rim. Shake can well for at least 1 minute after agitator ball
begins to rattle. Shake intermittently during use. Hold the
can 10 to 12 inches from surface and press spray head
rmly. Spray from side to side for even coverage. Clear
spray head after each use by turning can upside down
and spraying for 2 to 3 seconds.
Limitations: Please refer to the Safety Data Sheets for
specic information on material hazards, etc. Avoid any
open ames, electrical arcs or the use of strong oxidizing
agents, acids or bases.
Packaging:
Aerosol: Cans (211x604) 12 oz. net wt. (340 g) 16.00 . oz. (473 ml)
Case - 12 cans / case 13 lbs. (5.9 kg) 0.47 cf (0.013 cm)
Bulk: 1 case of 2 gallons (mt.f.) 17 lbs. (7.7 kg) 0.50 cf (0.014 cm)
5-gallon pail (mt.rd.) 40 lbs. (18.1 kg) 1.20 cf (0.034 cm)
50-gallon drum (mt.rd.) 402 lbs. (182.3 kg) 8.50 cf (0.241 cm)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
VOC <65%, Aerosol MIR <1.40 Non Flat
Product number plus letter designation is as follows:
G = 2 one-gallon cans per case; F = 1 ve-gallon pail; D = 50- gallon drum