Product Manual

No. 1710 - 01/17
STRIPING PAINT
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Description: Uniquely formulated to adhere to a variety
of surfaces, especially asphalt and concrete. Aervoe
Striping Paint formulas offer excellent resistance to trafc
and oil. Application via a line striping machine allows the
line width to be adjusted from 2 to 4 inch.
Benefits: Aervoe Striping Paint is versatile and
economical for small- to- medium sizes jobs. This product
is cost effective for achieving professional results with no
special operator training required. Use of Aervoe aerosol
Striping Paint eliminates paint waste and clean-up.
For large applications, the bulk striping paint is most
economical. All colors are lead-free.
Uses: This paint may be used for line striping on parking
lots, warehouse floors, school yards, factory safety
aisles, tennis courts, baseball elds, tracks and other
applications where separations and storage areas are
needed. 780 Clear may be used as a top coat to increase
longevity of the stripe.
Application: Aervoe Striping Paint is intended for use
with Aervoe's Striping equipment; test other applicators
for compatibility. Apply to clean, dry, and oil-free surfaces
only. The aerosol Striping Paint should be used in the
#800 Vers-A-Striper. For stenciling and touch up, use the
#745 Striping Stick.
Directions: Shake can vigorously for at least one minute
after rattle of agitator ball is heard. Use only when can
temperature is between 65° and 85°F (18° and 29°C).
Can temperatures above and below this range may cause
fuzzy edges or thin coverage. Before storing partially used
cans, clear spray tip by holding can in upright position and
pressing tip to one side, away from face, for 2 seconds.
Aervoe bulk Striping Paint should be stirred thoroughly
before use. Thin paint with Acetone to proper viscosity.
Limitations: Please refer to the Safety Data Sheets for
specic information on material hazards, etc. The aerosol
product is designed to spray upside down only, and will
not deliver paint if the tip is activated while being pointed
above horizontal. Heavy applications on turf surfaces will
result in grass root damage, therefore, we recommend
using Aervoe's water-based Athletic Striping Paint. Allow
new asphalt or seal coated surfaces to cure 4 to 7 days
before applying Striping Paint, as the asphalt will bleed
through white paint and turn it brown. Should a tip become
clogged due to storage in the machine, we have supplied
6 extra per case.
Packaging:
Aerosol: Cans (20 oz.) 18 net wt. (510 g) 18.8 . oz. (556 ml)
Case (12/case) 18 lbs. (8.2 kg) 0.55 CF (0.016 CM)
Bulk: 1 case of 2 gallons 24 lbs. (10.9 kg) 0.13 CF (0.004 CM)
5-gallon pail (mt. rd.) 54 lbs. (24.5 kg) 1.2 CF (0.34 CM)
50-gallon drum (mt. rd.) 535 lbs. (242.7 kg) 8.5 CF (0.24 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
AEROSOL VOC <66%; CARB MIR <0.85 GROUND TRAFFIC; BULK VOC 450 g/l
710 - STRIPING WHITE
720 - STRIPING YELLOW
730 - STRIPING RED
740 - STRIPING ORANGE
750 - STRIPING BLUE
760 - STRIPING GREEN
770 - ASPHALT BLACK
780 - STRIPING CLEAR
Product number plus letter designation is as follows:
G = 2 one gallon can; F = 1 ve-gallon pail; D = 50-gallon drum