User's Guide

During transport, store the glasses in the provided
charging case to avoid unnecessary scratches on the
product.
The glasses can only be used within a temperature
range of -10°C to 40°C
Don’t attempt to remove the rechargeable lithium-ion
battery from the product.
After each use, wipe all sides of the glasses with the
cloth provided or a dry cloth.
Regulatory Information
Aether glasses and charging case has been tested and
complies with RF: ( BT5.0 & 2.4G ) , EMC: ( BT5.0 & 2.4G ) ,
EN55020, EMF: EN62479, LVD: EN62358 - 1: 2014 + AC
: 2015.
This low power electronic device complies with EN62479
and does not cause harmful interferences to the user
at any time, except for situations of violated safety
constraints. Accordingly, the limit for radiation exposure
is adhered to, as defined for user’s health for the general
population. The device has immunity against
Troubleshooting
Power on and wear the glasses to enable touch control
to work. Long press either sides of the touch controls
for 10 seconds to reset the glasses.
Designed and developed by Aether Eyewear PTE. LTD.
160 Robinson Road #14-04 Singapore
Important Information
The glasses can only be repaired and serviced by
Aether. Do not repair or service your glasses anywhere
else. For repairs and servicing, please contact us at
[e-mail]
electromagnetic interference as species by EN55020.
The batteries in the glasses and the charging case are in
compliance with IEC62133 / UL2054 / UL1642.
The product is designed to block more than 99% UVA and
UVB light energy. This product is in compliance with
ANSI Z80.3 - 2018 and AS / NZS 1067. 1 : 2016.
The lenses meet applicable government impact resistance
requirements but are not shatterproof.
Trademarks
Bluetooth and the Bluetooth logos are registered
trademarks of Bluetooth SIG Bluetooth SIG, Inc., and
any use of such trademarks is under license.