Installation guide

FS4104-AW – Installation Guide
11 / 31
Description
FS4104-AW is an VDSL (Very high speed Digital Subscriber Line) router with switch Ethernet
10/100BaseT ports and an Ethernet wireless AP
1
. It can be used to connect PC’s, printers or any
other device with Ethernet network board to Internet or other remote networks (WAN).
Characteristics
 VDSL DMT based technology;
 ATM (Asynchronous Transfer Mode) transportation: it supports up to 10 virtual circuits (VC)
for data transmission;
 embedded integrated 4-port 10/100BaseT autosensitive Ethernet switch interface with direct
access from back panel for quick connection of network devices;
 embedded 802.11b/g access point;
 simple configuration procedures for immediate device connection to network;
 WEB-Browser guided configuration from any PC in the LAN;
 Network Address Translation (NAT) functionality to share the same IP address between
different stations in the LAN and provide suitable security system for connections;
 Dynamic Host Configuration Protocol (DHCP) server functionality for automatic configuration
of PC’s connected to FS4104-AW in the LAN and DHCP client LAN side;
 DNS (Domain Name System) server and forwarder functionality for host and domain name
resolution in IP addresses;
 firewall function for internal network protection against external attacks and personalized
management of access rights of individual hosts to network services;
 band monitoring of outgoing WAN traffic;
 QoS (layer 3 and layer 2) functionalities for voice and data traffic management optimization;
 VPN (Virtual Private Network) with the following tunneling modes: IP-SEC, GRE, IpinIP,
PPTP server/client;
 IPSEC protocol to increase security either for VPN or end-to-end connection over a public
infrastructure such as the Internet
 VLANs (Virtual LANs) with the following configuration: Port based (Untagget to tagged),
“Implicit” VLAN operation (port-to-VCC mapping), Trunking (VLID-to-VCC forwarding),
Priority based queuing.
1
Access Point.