Specifications

ManualsBrandsAEV ManualsAudio MixerACUO 908 Serie

ACUO 908

AEV Broadcast Srl

, via della Tecnica 33

Tel. +39 051 6630904

Fax +39 051 893605

Out Start/Stop A: with the

Master knob jog to the

the input channel

, so when this channel is in Start, the contact between the pins 1 and 9 will close,

with the channel in Stop, the contact will open.

Out Start/Stop B: with the

Master knob jog to the

the input channel

, so when this channel is in Start

close, with the channel in Stop, the contact will open.

GPO Tally : this fu

nction is enabled

over to START mode,

a stable contact is activate

GPO 3 with the

Master knob jog to the

channel; when the channel

changes over to START mode

pins 4 and 12.

In Start/Stop A: with the

Master knob jog

assign the channel; so

every time that the

the external circuit, th

e channel changes between the START

channel will

sent to the external device by the

In Start/Stop B: with the

Master knob jog

assign the channel; so

every time that the

the external circuit, th

e channel changes between the START

channel will sent to the external device by the

ACUO 908

Serie - AEV ON AIR CON

SOLE

, via della Tecnica 33

–

40050 Argelato (BO) Italy

Fax +39 051 893605

Web site www.aev.eu e

Master knob jog to the

GPIO1 ( Start/Stop A)

function,

, so when this channel is in Start, the contact between the pins 1 and 9 will close,

with the channel in Stop, the contact will open.

Master knob jog to the

GPIO2 ( Start/Stop B)

function,

, so when this channel is in Start

, the contact between the pins 2 and 10

close, with the channel in Stop, the contact will open.

nction is enabled

( ON ) by the channel’s encoder; when

the

a stable contact is activate

between the pins 3 and 11.

Master knob jog to the

GPIO2 ( Start/Stop C) function, to

assign the input

changes over to START mode

, a stable contact is activate

Master knob jog

select the function GPIO1

( Start/Stop A)

every time that the

opto-copled

between the pins 5 and 13 will

e channel changes between the START

and STO

P mode. The state of the

sent to the external device by the

Out Start/Stop A contact.

Master knob jog

select the function GPIO2

( Start/Stop

every time that the

opto-copled between the

pins 6 and 14

e channel changes between the START

and

STOP mode. The state of the

channel will sent to the external device by the

Out Start/Stop B contact.

SOLE

40050 Argelato (BO) Italy

mail info@aev.eu

function,

to assign

, so when this channel is in Start, the contact between the pins 1 and 9 will close,

function,

to assign

, the contact between the pins 2 and 10

will

the

channel changes

assign the input

, a stable contact is activate

between the

( Start/Stop A)

and

between the pins 5 and 13 will

active by

P mode. The state of the

( Start/Stop

B) and

pins 6 and 14

will active by

STOP mode. The state of the