Specifications

ACUO 908
AEV Broadcast Srl
Tel. [phone]
Fax [phone]
Guarantee
The equipment is warranted for a period of 2 years from the date of invoice (ex
warranty does not cover faults provoked by carelessness, natural causes and par
to wear. In addition, the cost of shipment is not covered. The warranty will be voided if the
equipment is mishandled.
Technical Support
If you require technical support, contact AEV SERVICE giving a clear and concise account of
your speciic pr
oblem. Quote the serial number of your equipment by referring to the AEV
nameplate attached to the equipment itself as this is the most important piece of information
to be provided.
Telephone: [phone]
Fax:
Factory Service and Repairs
If problems arise while the equipment is being installed, consult this manual and check that
the installation is being carried out properly. If the problems still cannot be solved, call the AEV
SERVICE Department for further information. If the problem
call will probably sufice. If, on the other hand, the equipment is to be shipped to AEV for
service or repairs.
Shipping Instruction
When shipping the equipment to AEV, use the original package in order to be certain tha
be fully protected during handling. If you need the original package, call us for a new one.
If you ship the equipment in a different packing container, take care to provide a double
package by interposing padding material between the two contain
the equipment during shipment. The package should be marked “FRAGILE” in red.
Remember that the RMA number must be clearly visible on the package. If it is not, the
equipment will not be accepted.
IMPORTANT:
Carefully read th
operator safety and directions regarding the installation, operation and maintenance of the
equipment.
Failure to observe the safety instructions and information given in this manual
infringement of the safety rules and design
equipment.
AEV Broadcast Srl
declines all responsibility
not observed.
AEV Broadcast Srl declines
all responsibility
The equipment is to be used by people capable of operating it in a trouble
is assumed that they are aware of the following safety rules.
• Keep this manual with the utmost care and close at hand so tha
whenever needed
• After unpacking the equipment, check it for condition.
• Avoid banging the equipment.
• The packing material (plastic bags, polystyrene, nails, etc.) must never be left within the
reach of the children, as
these item
• Do not use the equipment in places where the temperature is not within the
range, as specified
by the manufacturer.
• Before connecting the equipment, make sure the nameplate specifications
mains electricity supply (the nameplate is located on the equipment enclosure).
• Do not remove the sticker from the equipment as it contains important
relevant serial number.
• To join the equipment to the mains supply, use the pow
equipment.
• The equipment must be used only for the purpose it was designed for.
ACUO 908
Serie - AEV ON AIR CON
SOLE
AEV Broadcast Srl
, via della Tecnica 33 –
40050 Argelato (BO) Italy
Fax [phone]
Web site www.aev.eu
2
The equipment is warranted for a period of 2 years from the date of invoice (ex
warranty does not cover faults provoked by carelessness, natural causes and par
to wear. In addition, the cost of shipment is not covered. The warranty will be voided if the
If you require technical support, contact AEV SERVICE giving a clear and concise account of
oblem. Quote the serial number of your equipment by referring to the AEV
nameplate attached to the equipment itself as this is the most important piece of information
Fax:
[phone]
If problems arise while the equipment is being installed, consult this manual and check that
the installation is being carried out properly. If the problems still cannot be solved, call the AEV
SERVICE Department for further information. If the problem
is a minor one we can a telephone
call will probably sufice. If, on the other hand, the equipment is to be shipped to AEV for
When shipping the equipment to AEV, use the original package in order to be certain tha
be fully protected during handling. If you need the original package, call us for a new one.
If you ship the equipment in a different packing container, take care to provide a double
package by interposing padding material between the two contain
ers in order to fully protect
the equipment during shipment. The package should be marked “FRAGILE” in red.
Remember that the RMA number must be clearly visible on the package. If it is not, the
equipment will not be accepted.
Carefully read th
is paragraph as it contains important instructions concerning
operator safety and directions regarding the installation, operation and maintenance of the
Failure to observe the safety instructions and information given in this manual
infringement of the safety rules and design
specifications provided for this piece of
declines all responsibility
if any one of the safety rules given here
all responsibility
if the end-
user resells the product.
The equipment is to be used by people capable of operating it in a trouble
-
is assumed that they are aware of the following safety rules.
• Keep this manual with the utmost care and close at hand so tha
t it can be consulted
• After unpacking the equipment, check it for condition.
• Avoid banging the equipment.
• The packing material (plastic bags, polystyrene, nails, etc.) must never be left within the
these item
s are potential sources of danger
.
• Do not use the equipment in places where the temperature is not within the
by the manufacturer.
• Before connecting the equipment, make sure the nameplate specifications
mains electricity supply (the nameplate is located on the equipment enclosure).
• Do not remove the sticker from the equipment as it contains important
specifications and the
• To join the equipment to the mains supply, use the pow
er cord purchased with the
• The equipment must be used only for the purpose it was designed for.
SOLE
40050 Argelato (BO) Italy
e-mail [e-mail]
The equipment is warranted for a period of 2 years from the date of invoice (ex
-works). The
warranty does not cover faults provoked by carelessness, natural causes and par
ts subject
to wear. In addition, the cost of shipment is not covered. The warranty will be voided if the
If you require technical support, contact AEV SERVICE giving a clear and concise account of
oblem. Quote the serial number of your equipment by referring to the AEV
nameplate attached to the equipment itself as this is the most important piece of information
If problems arise while the equipment is being installed, consult this manual and check that
the installation is being carried out properly. If the problems still cannot be solved, call the AEV
is a minor one we can a telephone
call will probably sufice. If, on the other hand, the equipment is to be shipped to AEV for
When shipping the equipment to AEV, use the original package in order to be certain tha
t it will
be fully protected during handling. If you need the original package, call us for a new one.
If you ship the equipment in a different packing container, take care to provide a double
ers in order to fully protect
the equipment during shipment. The package should be marked “FRAGILE” in red.
Remember that the RMA number must be clearly visible on the package. If it is not, the
is paragraph as it contains important instructions concerning
operator safety and directions regarding the installation, operation and maintenance of the
Failure to observe the safety instructions and information given in this manual
constitutes an
specifications provided for this piece of
if any one of the safety rules given here
in is
user resells the product.
-
free manner and it
t it can be consulted
• The packing material (plastic bags, polystyrene, nails, etc.) must never be left within the
.
• Do not use the equipment in places where the temperature is not within the
recommended
• Before connecting the equipment, make sure the nameplate specifications
correspond to the
mains electricity supply (the nameplate is located on the equipment enclosure).
specifications and the
er cord purchased with the