Specifications

ACUO 908
AEV Broadcast Srl
Tel. [phone]
Fax [phone]
Micro - Line channel
( cha
All controls on the Micro-
Line input channel are described below.
1
2
3
4
5
6
7
8
9
ACUO 908
Serie - AEV ON AIR CON
SOLE
AEV Broadcast Srl
, via della Tecnica 33 –
40050 Argelato (BO) Italy
Fax [phone]
Web site www.aev.eu
7
( cha
nnels 1 – 4 )
Line input channel are described below.
1 – START lamp, it
lights when
active
2 – knob jog ; directly it
select the Gain input leve
range is -12
÷ +12 dB
in sequence, the following commands:
1th push-
buttom Balance adjust
2th push-
buttom Treble band adjust
3th push-
buttom Middle band adjust
4th push-
buttom Bass band adjust
5th push-buttom Private Tel
active (OFF/ON
6th push-buttom
TB Studio to C.Room active (OFF/ON
7th push-buttom PGM
bus selection (
8th push-
buttom Control Room Mute
9th push-buttom
Mute C.Studio active (OFF/ON
10th push-buttom Tally
active (OFF/ON
11th push-buttom TB Regia
to C. Studio
(OFF/ON)
12th push-
buttom Phantom power for the
condenser microphone
active ( OFF/ON )
3 – MIC
to activate the microphone source (only with
the channel in STOP)
microphones.
4 – LIN
E to activate the line source (only with the
channel in STOP)
5 –
PGM Button for routing the channel to the PGM bus.
6 –
UTL Button for routing the channel to the UTL bus.
7 – AUX
Button for routing the channel to the AUX bus.
8 - Button enabling the p
review CUE.
9 - Fader.
SOLE
40050 Argelato (BO) Italy
e-mail [e-mail]
lights when
the channel fader is
select the Gain input leve
l the
÷ +12 dB
;
in sequence, the following commands:
buttom Balance adjust
(-12 ÷ +12 dB)
buttom Treble band adjust
(-14 ÷ +14 dB)
buttom Middle band adjust
(-14 ÷ +14 dB)
buttom Bass band adjust
(-14 ÷ +14 dB)
active (OFF/ON
)
TB Studio to C.Room active (OFF/ON
)
bus selection (
Speech/ Music)
buttom Control Room Mute
active (OFF/ON)
Mute C.Studio active (OFF/ON
)
active (OFF/ON
)
to C. Studio
active
buttom Phantom power for the
active ( OFF/ON )
to activate the microphone source (only with
E to activate the line source (only with the
PGM Button for routing the channel to the PGM bus.
UTL Button for routing the channel to the UTL bus.
Button for routing the channel to the AUX bus.
review CUE.